Title

Type a title to display for the component. This title is used both in Web and Designer.

Icon

To select an icon to represent the component, click Select Icon, click the desired icon, and click OK. To remove the icon, click Clear Icon.

Web Map

Click Select, select a web map to use and click Select. You can search for a web map by name or portal item ID. You can search web maps you own, web maps shared with you or public web maps.

For a list of supported web maps, see 2D Web Map Support.

All basemaps, reference layers, and base layers should ideally use exactly the same spatial reference as the web map.

If both a 2D web map and 3D web scene are configured in the Map component, the 2D web map must also use exactly the same spatial reference as the 3D web scene.

Use Esri Field Formatting

Whether to use the field formatting configured in the Esri portal or the formatting defined within Web Designer.
In the Esri portal, the field formatting settings are found within the layer's pop-up configuration.
In Web Designer, formatting settings are found within both the Region and Map component settings. Formatting settings in the Region service affect the entire app. Within the Map component, formatting can apply to an entire layer or an individual field.

Web Scene

Click Select, select a web scene to use and click Select. You can search for a web scene by name or portal item ID. You can search web scenes you own, web maps shared with you or public web scenes.

For a list of supported web scenes, see 3D Web Scene Support.

Default View

Determines whether to display the 2D web map or 3D web scene when the app starts.

This option is only available when you have configured both a web map and a web scene.

Configure Layers for:

Switches between the 2D web map or 3D web scene for both the app preview and configuration settings.

This option is only available when you have configured both a web map and a web scene.

Disable/Enable Identify

Click the icon to toggle the identify function for this layer.

Disable/Enable Search

Click the icon to toggle search for this layer.

Open the Layer

Click the arrow to open the settings for this layer view its field extensions. 

Title

Type a title for this menu item as it will appear in the Result Details, Results List, and Results Table panels.

Description

Enter a summary of what this menu item does. If you don't want ta description of the menu item, leave it blank.

Icon

To select an icon to represent this menu item, click Select Icon, click the desired icon, and click OK. To remove the icon, click Clear Icon.

Command

The command to run when a user clicks the menu item. A command is an action the app should perform.

Hide when Disabled

Whether to hid the menu item when the command cannot be executed.

Can be Toggled

Whether the menu item can be toggled between two states. If the menu item can be toggled, you can specify the behavior of the menu item for both states as well as whether the menu item is toggled by default.

Visible To

Determines which users and groups can access this component. If no users or groups are specified, all users can access this component by default.

The Hidden From setting overrides this setting.

Hidden From

Determines which users and groups are explicitly forbidden to access this component.

This setting overrides the Visible To setting.

Disable Search

Click the icon to disable the search for this field extension.

Open the Field Extension

Click the arrow to open the settings for this field. 

Searchable

Click the icon to turn off searching for this field extension.

Identify

Turn identifying on or off for this layer.

Search

Turn search on or off for this layer.

Zoom Scale

Set the scale to which the map should zoom for results in this layer. When zooming to results from multiple layers, the highest Zoom Scale is used. If both Zoom Scale and Zoom Factor are set, the higher of the two scale values is used.

Zoom Factor

Set the Zoom Factor that is applied to the geometry of non-point results to calculate the scale at which to zoom. When zooming to non-point results from multiple layers, the highest Zoom Factor is used. The default is 1.5. If both Zoom Scale and Zoom Factor are set, the higher of the two scale values is used.

Icon

An image file to display as the layer icon. This icon appears in the layer list, result summary and results list.

The image file types supported are: JPG, JPEG, PNG and SVG.

Enable Client-Side Data

Determines whether this layer's data should be available client-side, within the graphics that render on the map. Client-side data allows for fast identify operations to be performed, as no external queries are necessary; however, this can cause the map's load time to increase. When enabled, all fields that are configured in the layer's PopupTemplate will load client-side.

Inherit Formatting

Turn inherited formatting options on or off.

Turn off Inherit Formatting to activate options to set custom formatting for this layer. 

Date Format

Select the format of the date to use for this layer. The default is Date Time Short. 

Number Format

Select the number format to use for numbers displayed by this layer. For more information on number formats, see Standard Numeric Format Strings. The default is Fixed Point. Select one of the following formats:

•Number: A localized representation of a number with a decimal separator, group separator and optional negative sign. For example, in the en-us locale: 12,345.67 or -42.

•Fixed Point: A localized representation of a number with a decimal separator and optional negative sign. For example, in the en-us locale: 12345.67 or -42.

•Currency: A localized representation of a monetary amount in a specific currency. For example, in the en-us locale: $123.45 for USD or £123.45 for GBP.

•Accounting: A localized representation of a monetary amount in a specific currency except negative values are displayed in brackets. For example, in the en-us locale, -$543.21 would be represented as: ($543.21) for USD.

•Percent: A localized representation of a percentage. For example, in the en-us locale, 0.99 would be represented as 99%.

•Custom: Use one or more numeric specifiers to define how to format numeric data. For more information, see Microsoft's Custom Numeric Format Strings.

Currency

Select the currency you want to use for this layer. The default is USD.

Fractional Digits

 Type in the number of digits to appear after the decimal point in fractions. If you do not set a number, the default applied to currency units depends on the currency.  For a number format, the default applied is 4. 

Layer Failure Action

Specify what VertiGIS Studio Web should do when this layer fails to load:

•Halt Map Load: Stop loading the map and display an error.

•Warn End User: Continue loading the map but warn the end user this layer failed to load.

•Silent Failure: Continue loading the map and do not warn the user this layer failed to load.

Map Clicked

The command to run when the map is clicked or tapped. A command is an action the app should perform.

Some commands have additional settings you can configure.

Map Initialized

The command to run the first time the map finishes loading. A command is an action the app should perform. The command runs again if the page is refreshed but not when switching between a 2D web map and a 3D web scene, or vice versa.

Some commands have additional settings you can configure.

Map Hovering

The command to run when the user begins to hover the mouse cursor over a location on the map. A command is an action the app should perform.

Some commands have additional settings you can configure.

Map Hovered

The command to run when the user finishes hovering the mouse cursor over a location on the map, that is, when the mouse cursor is no longer hovering over the location. A command is an action the app should perform.

Some commands have additional settings you can configure.

Map Viewpoint Changed

 The command to run when the map viewpoint changes, for example, when the user pans or zooms the map. A command is an action the app should perform.

Some commands have additional settings you can configure.

Any command for Map Viewpoint Changed should be considered carefully for performance reasons.

Title

Type a title for this menu item as it will appear in the context menu. 

Description

Type a description of what this menu item does. If you do not want a description of the menu item, leave it blank. 

Command

The command to run when a user clicks the menu item. A command is an action the app should perform. 

To select the command you want, click the box that contains the current command followed by . The list of available commands depends on the context of the component.

Some commands have additional settings you can configure.

Icon

To select an icon to represent this menu item, click Select Icon, click the desired icon and click OK. To remove the icon, click Clear Icon.

Command

The command to run when a user clicks the menu item. A command is an action the app should perform.

Hide when Disabled

Whether to hide the menu item when the command cannot be executed.

Can be Toggled

Whether the menu item can be toggled between two states. If the menu item can be toggled, you can specify the behavior of the menu item for both states as well as whether the menu item is toggled by default.

Visible To

Determines which users and groups can access this component. If no users or groups are specified, all users can access this component by default.

The Hidden From setting overrides this setting.

Hidden From

Determines which users and groups are explicitly forbidden to access this component.

This setting overrides the Visible To setting.

Leading Layers Label

 The label for the leading layers side of the map.

Leading Layers

The layers to appear on the leading layers side of the map.

Trailing Layers Label:

The label for the trailing layers side of the map.

Trailing Layers

The layers to appear on the trailing layers side of the map.

Comparison Direction

 The direction in which the layer comparison slider moves and therefore how the map is split:

•Horizontal: Split the map so that the leading layers are on the left and the trailing layers are on the right.

•Vertical: Split the map so that the leading layers are at the top and the trailing layers are at the bottom.

Label Position

The position of the labels for the leading and trailing layers. This setting is affected by the Comparison Direction.

•Start: Position the label at the start of the component.

•Center: Position the label at the center of the component.

•End: Position the label at the end of the component.

Visible

Determines whether the layer comparison tool is visible. You must enable this setting to use the layer comparison tool.

Configurable

Determines whether the end user can click the labels of the leading and trailing layers to select which layers appear.

Maximum Scale

Set the maximum scale to which the map can be zoomed in.

Minimum Scale

Set the minimum scale to which the map can be zoomed out.

Rotation Enabled

Turn the ability to rotate the map on or off. When on, the map can be rotated using gestures on a touchscreen. The default is On.

Snap to Zoom

Turn the Snap to Zoom feature on or off. When on, and you zoom in or out, the map snaps to the closest incremental scale setting. The default is Off.

Visible To

Determines which users and groups can access this component. If no users or groups are specified, all users can access this component by default.

The Hidden From setting overrides this setting.

Hidden From

Determines which users and groups are explicitly forbidden to access this component.

 This setting overrides the Visible To setting.

Margin (px)

The margin space around the component in pixels.

Initially Hidden

Specifies whether or not the component is initially hidden when the app loads. If selected, the component remains hidden unless activated, for example, by the Show command.